Thermal Mugs: Plastic Vs Stainless Steel

The basic design of thermal mugs, whether they are plastic or stainless steel is the same – double wall insulation with a lid to seal the top. But even though stainless steel versions cost more than plastic versions, in the long run, they are the best deal for travelers. They can also be made of ceramic or glass, but those are generally designed for household use and not for travel due to the possibility of breakage.

The main benefits of a stainless steel mug are durability and better insulation. Steel is tough, and although plastic mugs can take a beating, a steel mug can last much longer. This is especially true when compared to the more brittle, hard plastic mugs that are sometimes used to display stylish designs and finishes. Although messy, dropping a steel mug of coffee will not generally cause any damage.

There are three basic types of insulation used; Air, foam or vacuum between double walls. Plastic versions usually use either air or foam. Both work acceptably, but air or foam is not as effective as vacuum insulation. More often than not, steel mugs use vacuum insulation which can keep beverages hot for a longer period of time. This can be quite important especially on long (and cold!) Morning commutes.

Beyond the two primary benefits, there are a few other benefits that stainless steel thermal mugs have when compared to plastic mugs. Plastic, being slightly softer, is more difficult to clean. You can use tough cleansers (making sure they're non-toxic!) On steel, but the same cleansers will scratch and damage plastic. For the same reason, plastic mugs tend to retain the flavors of the beverages that have been in them. This is not really a problem if you just drink regular generic coffee every day, but if you use the mug for different beverages, it can be.

When you look at all the factors, durability, ease of cleaning, effective insulation and better flavor, the stainless steel thermal mug is by far the best choice, even though it can be a bit more expensive. The only real benefits of plastic mugs are the lower price in the short run (which can be a big benefit if you lose your mug frequently!) And that they are slightly lighter than stainless steel mugs.

Posted in general | Tagged , , | Comments Off on Thermal Mugs: Plastic Vs Stainless Steel

What Is the Difference Between an Heir and a Beneficiary?

The term ‘heir’ refers to a person who is entitled to property owned by a deceased family member. Individuals can bequeath property to heirs through their last will and testament or a trust. When a person dies without leaving a Will, their assets are given to rightful heirs according to state probate laws.

An heir can be a surviving spouse, minor or adult children, mother, father, or siblings. Heirs can also include direct lineage relatives such as aunts, uncles, and cousins. Individuals can bequeath property to whomever they desire. If they gift items to anyone outside the family, those individuals are referred to as beneficiaries. Although somewhat confusing, heirs can be beneficiaries, but beneficiaries are not always heirs.

The only way to ensure property is distributed according to your wishes is to execute a legal Will. When property is held in a trust, the Will is used to provide directives regarding distribution. Unless inheritance assets are placed into a trust, the estate must undergo the probate process.

Probate is required to settle decedent estates. Two types of probate exist – testate and intestate. Testate refers to estates which include a last Will, while intestate refers to estates where no Will exists. The probate process varies depending on the type. Intestate estates take longer to settle because additional procedures must be taken.

The last will and testament is also used to designate a probate personal representative. This person is responsible for all tasks required to settle the estate. This can include paying any outstanding debts owed by the decedent; filing a final tax return and paying outstanding taxes; obtaining appraisals for valuable property; securing personal property owned by the decedent; and distributing inheritance gifts left to heirs and beneficiaries.

The last will can also be used to disinherit an heir. When a person decides to leave a direct lineage relative out of their Will they must include a disinheritance clause which states the reason for exclusion. While this clause does not prevent heirs from contesting the Will, it can minimize the risk. If a disinheritance statement is not included, heirs can prolong the probate process by claiming the decedent was influenced by another person or not in their right mind when executing the Will.

Contesting a Will is a costly process that often bankrupts estates due to excessive legal fees. Those who have direct lineage relatives whom they do not want to bequeath gifts to should consult with a probate lawyer to ensure their Will is properly executed.

Engaging in estate planning can keep certain assets out of probate and allow quick distribution to heirs. Individuals with checking or savings accounts can designate beneficiaries to receive funds at death. This is referred to as payable on death (POD) beneficiaries. Account holders must fill out POD beneficiary forms to provide the names, addresses, date of birth, and social security number. Upon death, beneficiaries must provide photo ID and a copy of the decedent’s death certificate to claim funds.

Individuals with retirement accounts or financial portfolios can assign transfer on death (TOD) beneficiaries. Upon death, heirs can elect to transfer funds into a new account to avoid estate taxes or cash-out the account. It is best to consult with a tax attorney to discuss tax ramifications before accepting lump sum cash.

Executing a last will and testament is one of the best gifts you can leave loved ones. Wills should be updated when major events occur. These might include buying or selling real estate; starting or closing a business; or when a new heir is born or a designated heir dies.

Posted in general | Tagged , , | Comments Off on What Is the Difference Between an Heir and a Beneficiary?

India, The Tourist’s Paradise

India is a land that offers a mind-boggling diversity of natural beauty, flora and fauna, a rich, vibrant and proud history of cultural heritage and is famous for its hospitality to people who are fascinated by the numerous stories enchanting stories about India and come To visit the country. And the country does not disappoint them. The majestic snowcapped mountains, the lush rolling valleys, the gushing rivers, green fields, gorgeous colorful flowers and luscious fruits, the arid deserts, the plateaus, the hills, the tea gardens on the mountain slopes, the orchards, the waterfalls, the list Simply goes on and on. Every year, thousands of tourists from different parts of the world flock to this country for visiting different places, to enjoy different festivals, to take part in adventure tourism, pilgrimages etc. Tourism is one of the largest service industries in India and plays a major role in providing employment to the population and the country's economy. The tourism ministry in the country caters to the various demands and needs of the tourists. The India Tourism Development Corporation is a Government of India undertaking dedicated to taking care of travel needs like hotels, flights, trains, car rentals etc.

If you are coming to India the first time, it is advised that you read about the various destinations you are planning to visit and make full arrangements for accommodations. There are reputed hotel chains which have luxury hotels in different tourist destinations of the country. You can make your bookings online or over the telephone using the useful contact information available in their websites. Check out these sites and know more about the facilities, the tour packages, the tariffs etc available here.

If you are traveling on a tight budget, then there are numerous hotels with affordable rates but with high living standards. Before booking you must ensure that the neighboring area is safe, proper transport facilities are available and you can communicate with the outside world too. Book your hotels, cars etc online and enjoy a reliably hassle-free vacation.

The tourism board advises tourists to contact only fully authorized, reputed and trustworthy tour guides and tour operators to ensure a safe travel. These guides should at least have photo identity cards issued by the Ministry of Tourism. Arrange for proper transportations that will take you to different parts of the country. If you want to visit the more remote and somewhat inhospitable areas like the mountains of Ladakh, or the arid deserts of Rajasthan or forest safaris, then you must take proper precautions against potential dangers, diseases etc.

To arrange for flights, search online for cheap flights to India if the budget is limited. There are many websites which list information about flight ticket prices from different airlines, compare the prices and provide you with the best results. You can also opt for affordable holiday packages in India along with affordable accommodations and transportations. Search multiple travel portals to obtain the best options and cheap tickets to India. Just type in your destination and the sites will return a list of airline ticket prices for you to choose from.

Welcome to India and enjoy a vacation experience of a lifetime!

Posted in general | Tagged , , | Comments Off on India, The Tourist’s Paradise

Insurance Claims – Get an Advance Payment!

Insurance claim advance payments are not widely known by people who file claims. Often, when an insured has a loss of significant size, such as a flood, tornado, wildfire, hurricane loss or a big water damage loss, an advance payment of a portion of the anticipated settlement is issued by the insurance company. This situation also happens regularly when a business has a loss and needs money up front.

It is a customary and widely accepted practice for the insurance company to issue an advance payment in this type of instance. Be aware that there’s nothing in the standard property insurance policy that deals with advances. It is usually just a courtesy that the insurance company extends to their policyholder.

However, they don’t usually offer to do it. You have to request the advance.

Here’s an example. Joe Smith’s house is hit by lightning, and a fire damages most of the house. Joe’s policy has Building limits of $100,000, Contents limits of $50,000, ALE limits of $20,000. The house can be repaired for $70,000, which is less than the policy limits. However, the adjuster expects that the Contents loss will exceed the policy limits of $50,000, and the ALE loss will be $15,000. The adjuster sends in his first report to the insurance company, and tells them to expect the loss to be approximately $135,000 on these three parts of coverage.

The insurance company could easily issue an initial advance payment of $25,000 to $35,000 for Contents and ALE, and $40,000 to $50,000 for the Dwelling loss.

So, what do you do if your Contents are damaged and you need the most basic things, like a change of clothes and shoes? What if you need to have a contractor secure the building and put tarps on the roof to keep further rain out of the building? Most people do not have tens of thousands of dollars just lying in their bank accounts that could be used to begin repairs, or begin replacing personal property. That’s when the insurance company issues an advance.

It’s best to make your request in writing. Even if it’s just a hand-written letter, it’s best if it’s in writing. Write or type your request, keep a copy for your records, and give the copy to your adjuster. It’s also a good idea to send a duplicate copy to the claims department of your insurance company. Send it by overnight courier or certified mail. NEVER rely on the adjuster to ask for an advance on your behalf. He might get delayed with other work and it could be days before he asks. DO IT YOURSELF.

Take control of your claim, my friend! Make an EARLY request in the claims process for your advance payment!

Posted in general | Tagged , , | Comments Off on Insurance Claims – Get an Advance Payment!

Four Unconventional Ways to Land a $5K Loan With Bad Credit

A lot of folks got lifted high during the early part of the 21st Century. Times were good and promised to be so for a long time. Fearless about future debt, many consumers over-extended themselves. The economy fell flat thanks in part to this vast over-extension and the banking and mortgage industry that fed off of it.

As a result, loans came due with no cash flow to pay them. Foreclosures became normal. Credit card companies felt the pinch as members defaulted. Credit ratings suffered greatly. Presently, those folks have no recourse to any venues that could offer them any financial relief. A minimal $5,000 bad credit loan is unreachable.

People in this situation do have some options that they should consider while they try to rebuild their financial lives as well as their financial credibility. These options are perhaps not those that they would normally consider, but the times are not normal.

One: Familiar Loans

In one way this is the best scenario to get a much needed cash injection. In another, it could be the worst. Embarrassment is probably the biggest bar to approaching friends or family members for cash to get you through tough times. On the other hand, the terms for repayment can be quite flexible and interest rates can be low or nonexistent. Certainly, a loan such as this does not require a credit check. It would be wise and friendly to draw up a contract so each party knows what is expected.

Two: Salary Potentialities

Should a person in need of cash be to uncomfortable approaching family or friends, they might look to the workplace. Some progressive companies have opportunities for employees who have hit on hard times. A credit union may serve the company and it may be very happy to extend a loan at low interest rates and easy payback terms. If there is no credit union, sometimes an employer can be approached for a loan that can be deducted directly from future paychecks. Sometimes this sort of loan is available to promote loyalty and productivity.

Three: Non-Traditional Bad Credit Loans

Should the previous venues turn up dry, unsecured personal loans are available, either locally or via online lenders. Traditional lenders such as banks are not going to be forthcoming with any help for borrowers with poor credit. Online lenders do not consider credit scores and are usually eager to grant unsecured loans in the range of $500 to $10,000. The requirements are few; having steady employment and a bank account are often enough. The application process is easy and you can usually have cash in your account within 24 hours.

Four: Neighborhood Pawnshops

Do not cringe. For centuries shops such as this have been able to offer affordable loans to people in the community who find themselves a little shy of cash from time to time. Your loan will require security in the form of personal property offered as collateral that is equal to the worth of the loan. You will sign a document acknowledging your obligation. If you do not return to redeem the collateral, the shop is allowed to sell it to cover the loan.

No matter what sort of credit history you may have, you should be able to put your hands on some cash using the outlets described above. Just be sure you do not allow yourself to become a victim to any sort of fraud. Just be sure any money you do get is used responsibly and paid back according to the terms of any agreements.

Posted in general | Tagged , , | Comments Off on Four Unconventional Ways to Land a $5K Loan With Bad Credit

How to Wash a Microbead Pillow

Every so often, after repeated use, or due to messy accidents, micro bead pillows will need to be cleaned. Unlike memory foam or down pillows where only the pillowcase may be washed, micro bead pillows may be washed, just as long as proper measures are taken in order to prevent the pillow from being destroyed. On many micro bead pillows, the tag suggests that they may only be spot treated. This can be done by scrubbing the spot or spots out with soapy water or any other gentle cleaning solution; bleach should never be used.

However, people with young children or animals often find that the pillow may be too dirty to clean by the spot treating method. Microbead pillows may be washed in the washing machine as long as you are careful. It is important that the pillow is first placed in another pillowcase with the end tied off so it does not fall out during the wash. The pillowcase prevents the microbead pillow from falling apart through the tumbling and rushing water. It is the pillowcase that takes the beating while the microbead pillow remains safe inside while still receiving the cleaning that it needs. A detergent meant for fine fabrics or wool, such as Woolite should be used to further prevent possible tearing of the fabric. Again, no detergent with bleach should be used because it can break down the nylon lycra or spandex outer fabric of the pillow.

Wash the microbead pillow on your washing machine’s gentlest cycle using cold water only; heat risks damage to the microbeads as well as to the outside of the pillow. While washing, one should occasionally check on the pillow to make sure that no harm is coming to the pillow. While this step is not necessary, it is definitely a good idea. After washing, it is incredibly important to remember that the dryer cannot be used to dry it because, once again, the heat would create a terrible, sticky mess of the outer cover of your favorite pillow. However, a dryer may be used to tumble and air dry the pillow as long as no heat is used. To complete drying, the pillow must be hung to drip dry. With certain, higher quality brands of microbead pillows such as Snooztime, regular machine washing and drying is possible, making it easier and also more convenient to clean your favorite pillow. Cleaning microbead pillows properly ensures its owner many more years of comfortable rest.

Posted in general | Tagged , , | Comments Off on How to Wash a Microbead Pillow

The Rights That Go With Real Property

The rights that go with real property can be summed up by the term appurtenances. When real property is sold, appurtenant rights are ordinarily sold along with it. They can, however, be sold separately, and may be limited by past transactions. In addition to knowing the boundaries of the land and which items are considered part of the real property (fixtures vs. personal property), homeowners and lenders also need to understand which rights are being transferred along with that parcel of real estate.

Fee simple ownership includes such other appurtenances as access rights, surface rights, subsurface rights, mineral rights, some water rights, and limited air rights. One way to understand the rights that accompany real property is to imagine the property as an inverted pyramid, with its tip at the center of the earth and its base extending out into the sky. An owner has rights to the surface of the land within the property’s boundaries, plus everything under or over the surface within the pyramid. This includes oil and mineral rights below the surface, and certain water and air rights. Air rights are sometime regulated by each state allowing for air traffic and water rights can differ from state to state.

It is possible, though, for the owner to transfer only some of the rights of ownership to another person. For example, a property owner may sell the mineral rights to a piece of property, but keep ownership of the farm. Later, when the land is sold, the mineral rights will most likely stay with the mining company (depending upon the wording of the contract involved) even though the rest of the bundle of rights in the land is transferred to the new owner. The new owner is limited by the past transaction of the previous owner, and may not sell these mineral rights to another party, nor transfer them in a future sale of the land.

A lender must know if the entire bundle of rights is being transferred (fee simple) or if there are restrictions or past transactions that may limit the current transfer of ownership in any way. This is important because it may have a great effect on the value of the real property. Transfer of access rights for a sidewalk to be placed across the front of a subdivision lot generally would not have a significant impact on the value of a piece of land. Transfer of mineral rights to a mining company, as in the previous example, likely would impact the value.

Posted in general | Tagged , , | Comments Off on The Rights That Go With Real Property

Forehand Vs Backhand MIG Welding Techniques

Forehand and backhand welding are the most basic of all welding techniques. They are simple, have their purpose and provide a specific type of weld when used properly. In this article you will learn why these techniques are used and most importantly why.

Forehand Technique

Forehand is a technique where the welder pushes the puddle and keeps the arc slightly ahead of the puddle. Forehand welding is done with the MIG gun pointed in the direction of travel. For example, if the welder will be welding from right to left, then the MIG gun will point toward the left at all times. The angle that the MIG gun is pointed toward the direction travel can vary. The angle of the MIG gun can be anywhere between 5 degrees to as much as 35 degrees toward the direction of travel. When traveling forehand the welder must focus on keeping the arc slightly ahead of the puddle.

Backhand Technique

The backhand technique is the exact opposite of the forehand welding technique. In the case of back hand welding the welder keeps the MIG gun pointed toward the weld while traveling away from it. For example if the welder is welding from left to right then the MIG gun will be pointed toward the left. The angle of the MIG gun can vary between 5 degrees to 35 degrees toward the weld.

Understand the Reasons for these Welding Techniques

These MIG welding techniques do serve a very important purpose. What they do is control the weld shape and the penetration pattern.

Forehand welding is the most commonly used technique for MIG welding. What the forehand method does is produce a shallow but wide penetrating weld that is flat in appearance. This is the type of weld and penetration is used for most weld joints where overheating is not an issue.

Backhand welding is the least used welding technique when it comes to MIG. This technique produces the deep and narrow type of penetration that is best suited for thinner metals. The advantage of backhand welding is that the arc is focused onto the filler metal and that means extra material to prevent burn through. When welding thinner metals you always run the risk of burning a hole through the weld joint. With the backhand method the extra filler metal at the arc helps prevent this and at the same time can keep warp age to a minimum.

Posted in general | Tagged , , | Comments Off on Forehand Vs Backhand MIG Welding Techniques

Traveling is Fun

People all over the world love to travel. People travel for various purposes like business, leisure, education or recreational purposes. Traveling has become a part of people’s life and there is no life without traveling. Going to work everyday is also traveling. Traveling helps us to learn a lot. When we travel to other countries, we are able to learn about the culture, language and people of that country.

Many people, we find travel for work related purposes. Some people travel to other countries to seek work and there are lots of businessmen who are globally connected, traveling to various countries in the world to attend meetings, to expand their business, to build relations etc. This helps them to make more money.

A large percent of people travel for leisure. Everybody longs to relax. Nobody can work like a robot. To get away from the stress and tension of their work, they usually take a few days off to visit tourist places with their families to see places and enjoy a fantastic vacation. There are people who travel within their country, and there are people traveling to other countries depending on their budget.

Lots of students nowadays travel for education purposes, mainly for higher studies or for educational tours.

The World Tourism Industry is flourishing with tremendous growth and this industry is making changes every year to meet the demands of the increasing tourist. Tourism brings in a lot of money and increases employment opportunities in the country the tourism ministry in every country seeks ways to develop and promote tourism in their respective countries. The most visited country in the world today, happens to be France and Paris is the world’s most visited tourist destination. Switzerland also is a great tourist attraction because of it’s ski-resorts.

The Internet plays a very important role today in giving information of the various tourists attractions of the world, with the hotel and sightseeing facilities. With just a click of the mouse, you can book rooms suitable to your budget, in any part of the world.

Whether you are traveling for business or for pleasure, it is most important that you stay safe and enjoy your trip. First of all, you have to plan your trip well in advance. Once you have chosen your destination, plan your itinerary first. Book your flights and hotel reservation much in advance, especially during the seasonal period, to avoid disappointments. If you are choosing low budget hotels, make sure that you make proper research, because you might end up without the facilities mentioned on their websites. It is always best to book hotels with Internet facilities, because you can use Skype to keep in touch with your near and dear. This will help you to save a lot on your long distance telephone bills.The most important thing that you need during your travel is currency. You can use your ATM cards and credit cards. Travelers Checks can also be useful while traveling. The best advise for traveling is always travel light. Also be very careful about what you eat. Unhealthy eating can cause stomach problems and might end you up in the hospital, which can lead to an unexpected expense.

Traveling can be a very pleasurable experience if you do proper planning in advance.

Posted in general | Tagged , , | Comments Off on Traveling is Fun

Realty Vs Real Estate Vs Real Property

Realty and personal property terms have often been confused as to what they exactly mean. Here we will clear that right up for you. We will look at the terms personal property, realty, land, real estate, and lastly real property.

Let’s begin with personal property. Personal property also known as chattel is everything that is not real property. Example couches, TVs things of this nature. Emblements pronounced (M-blee-ments) are things like crops, apples, oranges, and berries. Emblements are also personal property. So when you go to sell your house, flip, or wholesale deal, you sell or transfer ownership by a bill of sale with personal property.

Realty.

Realty is the broad definition for land, real estate, and real property.

Land

Land is everything mother nature gave to us like whats below the ground, above the ground and the airspace. Also called subsurface (underground), surface (the dirt) and airspace. So when you buy land that’s what you get, keep in mind our government owns a lot of our air space.

Real Estate

Real estate is defined as land plus its man made improvements added to it. You know things like fences, houses, and driveways. So when you buy real estate this is what you can expect to be getting.

Real property

Real property is land, real estate, and what’s call the bundle of rights. The bundle of rights consist of five rights, the right to possess, control, enjoy, exclude, and lastly dispose. So basically you can possess, take control, enjoy, exclude others, and then dispose of your real property as you wish as long as you do not break state and federal laws.

Lastly there are two other types of property we should mention.

Fixture

Fixture is personal property which has been attached realty and by that now is considered real property. So you would ask yourself upon selling to determine value “did you attach it to make it permanent?” The exceptions to this rule are the garage door opener and door key, these are not considered fixtures.

Trade Fixtures

Trade fixtures are those fixtures installed by say a commercial tenant or can be the property of the commercial tenant.

I hope this clears up some misconceptions about personal property, realty, land and real estate and now fixtures and trade fixtures!

Posted in general | Tagged , , | Comments Off on Realty Vs Real Estate Vs Real Property